karakuri burger, pass burger, pass case, card case, commuter pass case, card holder
¥1,900
残り1点
International shipping available
A pass case/card case in the shape of a hamburger.
It can store transportation IC cards, admission cards, etc. The card will react to the sensor while stored, so there is no need to remove it at the ticket gate or charge machine. A reel (up to 23.6 in) is included as an accessory. It is filled with sponge, so you can shrink it up and store it in your bag. It also has a hard core to prevent the cards from breaking. It opens and closes with a snap button.
◎Materials:
Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Plastic snap button, reel with carabiner
◎Size:
Main body: Diameter 3.9 in, thickness 1.6 in,
Joint including D-ring 1.6 in,
Reel with carabiner: Height 1.9 in x width 1.5 in, reel length/maximum 23.6 in
Total weight: 2.1 oz
◎Note: 1:
The card is compatible with the main transportation IC card size [height 3.3 in, width 2.1 in], but please check the size of your card just to be sure.
It can be compatible if the size of the inner bag is within the range of [height 3.5 in, width 2.4 in].
◎Note: 2:
The stored card cannot be viewed from the outside.
If you need to visually check the information on the card, you will need to remove the card.
◎Note: 3:
Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
