-
smartphone bag with a shoulder strap whale shark shoulder bag
¥3,200
A smartphone shoulder bag in the shape of a whale shark. [Point 1] Can be used as both a shoulder bag and a waist pouch! Attached shoulder strap (approximately 59 inches) and waist strap (about 9.8 inches) [Point 2] Easy to put in and take out! There are no fasteners such as buttons or fasteners at the entrance. You can smoothly put in and take out your smartphone / iPhone. ■Compatible models■ Please check the size of the model you have before purchasing. The internal dimensions of this product are height 6.3 inches x width 3.3 inches x depth 0.39inches. Models with a vertical length of 6.3 inches or more have the top outside. ■ Material ■ ・Cotton fabric ・Sponge (soft polyurethane foam) ・halter snapt ・D ring ■ Dimensions ■ ・9 inches in height, 5.9 inches in width, 1.96 inches in thickness ・ Weight about 50 grams ■About washing■ Hand washing is preferred.
-
smartphone bag with a shoulder strap whale shark shoulder bag
¥3,200
A smartphone shoulder bag in the shape of a whale shark. [Point 1] Can be used as both a shoulder bag and a waist pouch! Attached shoulder strap (approximately 59 inches) and waist strap (about 9.8 inches) [Point 2] Easy to put in and take out! There are no fasteners such as buttons or fasteners at the entrance. You can smoothly put in and take out your smartphone / iPhone. ■Compatible models■ Please check the size of the model you have before purchasing. The internal dimensions of this product are height 6.3 inches x width 3.3 inches x depth 0.39inches. Models with a vertical length of 6.3 inches or more have the top outside. ■ Material ■ ・Cotton fabric ・Sponge (soft polyurethane foam) ・halter snapt ・D ring ■ Dimensions ■ ・9 inches in height, 5.9 inches in width, 1.96 inches in thickness ・ Weight about 50 grams ■About washing■ Hand washing is preferred.
-
smartphone bag with a shoulder strap whale shark shoulder bag
¥3,200
A smartphone shoulder bag in the shape of a whale shark. [Point 1] Can be used as both a shoulder bag and a waist pouch! Attached shoulder strap (approximately 59 inches) and waist strap (about 9.8 inches) [Point 2] Easy to put in and take out! There are no fasteners such as buttons or fasteners at the entrance. You can smoothly put in and take out your smartphone / iPhone. ■Compatible models■ Please check the size of the model you have before purchasing. The internal dimensions of this product are height 6.3 inches x width 3.3 inches x depth 0.39inches. Models with a vertical length of 6.3 inches or more have the top outside. ■ Material ■ ・Cotton fabric ・Sponge (soft polyurethane foam) ・halter snapt ・D ring ■ Dimensions ■ ・9 inches in height, 5.9 inches in width, 1.96 inches in thickness ・ Weight about 50 grams ■About washing■ Hand washing is preferred.
-
smartphone bag with a shoulder strap whale shark shoulder bag
¥3,200
A smartphone shoulder bag in the shape of a whale shark. [Point 1] Can be used as both a shoulder bag and a waist pouch! Attached shoulder strap (approximately 59 inches) and waist strap (about 9.8 inches) [Point 2] Easy to put in and take out! There are no fasteners such as buttons or fasteners at the entrance. You can smoothly put in and take out your smartphone / iPhone. ■Compatible models■ Please check the size of the model you have before purchasing. The internal dimensions of this product are height 6.3 inches x width 3.3 inches x depth 0.39inches. Models with a vertical length of 6.3 inches or more have the top outside. ■ Material ■ ・Cotton fabric ・Sponge (soft polyurethane foam) ・halter snapt ・D ring ■ Dimensions ■ ・9 inches in height, 5.9 inches in width, 1.96 inches in thickness ・ Weight about 50 grams ■About washing■ Hand washing is preferred.
-
smartphone bag with a shoulder strap whale shark shoulder bag
¥3,200
A smartphone shoulder bag in the shape of a whale shark. [Point 1] Can be used as both a shoulder bag and a waist pouch! Attached shoulder strap (approximately 59 inches) and waist strap (about 9.8 inches) [Point 2] Easy to put in and take out! There are no fasteners such as buttons or fasteners at the entrance. You can smoothly put in and take out your smartphone / iPhone. ■Compatible models■ Please check the size of the model you have before purchasing. The internal dimensions of this product are height 6.3 inches x width 3.3 inches x depth 0.39inches. Models with a vertical length of 6.3 inches or more have the top outside. ■ Material ■ ・Cotton fabric ・Sponge (soft polyurethane foam) ・halter snapt ・D ring ■ Dimensions ■ ・9 inches in height, 5.9 inches in width, 1.96 inches in thickness ・ Weight about 50 grams ■About washing■ Hand washing is preferred.
-
pass case, card case, commuter pass case, card holder, KARAKURIGOKORO, shipping from Japan, unisex, handmade, shark
¥1,900
《Product Description》 A pass case/card case in the shape of a whale shark. It can store transportation IC cards, admission cards, etc. It reacts to the sensor while stored, so there is no need to remove the card at the ticket gate or charge machine. A reel (up to 60 cm) is included as an accessory. It is filled with sponge, so it can be compressed tightly and stored in a purse or bag. It also has a hard core material built in to prevent the card from breaking. It opens and closes with Velcro for easy removal. Materials: Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Velcro tape, reel with carabiner Size: Main body: Total length 16 cm, width 6.5 cm, thickness 2.5 cm Joint including D-ring: 4 cm Reel with carabiner: Height 5 cm x width 4 cm, reel length: maximum 60 cm Total weight: 60 grams Note: 1: The card is compatible with the main transportation IC card size [height 8.5 cm, width 5.7 cm], but please check the size of your card just to be sure. It can be compatible if the size of the inner bag is within the range of [height 9 cm, width 6 cm]. Note: 2: The stored card cannot be viewed from the outside. If you need to visually check the information on the card, you will need to remove the card. Note: 3: Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
-
pass case, card case, commuter pass case, card holder, KARAKURIGOKORO, shipping from Japan, unisex, handmade, shark
¥1,900
《Product Description》 A pass case/card case in the shape of a whale shark. It can store transportation IC cards, admission cards, etc. It reacts to the sensor while stored, so there is no need to remove the card at the ticket gate or charge machine. A reel (up to 60 cm) is included as an accessory. It is filled with sponge, so it can be compressed tightly and stored in a purse or bag. It also has a hard core material built in to prevent the card from breaking. It opens and closes with Velcro for easy removal. Materials: Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Velcro tape, reel with carabiner Size: Main body: Total length 16 cm, width 6.5 cm, thickness 2.5 cm Joint including D-ring: 4 cm Reel with carabiner: Height 5 cm x width 4 cm, reel length: maximum 60 cm Total weight: 60 grams Note: 1: The card is compatible with the main transportation IC card size [height 8.5 cm, width 5.7 cm], but please check the size of your card just to be sure. It can be compatible if the size of the inner bag is within the range of [height 9 cm, width 6 cm]. Note: 2: The stored card cannot be viewed from the outside. If you need to visually check the information on the card, you will need to remove the card. Note: 3: Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
-
pass case, card case, commuter pass case, card holder, KARAKURIGOKORO, shipping from Japan, unisex, handmade, shark
¥1,900
《Product Description》 A pass case/card case in the shape of a whale shark. It can store transportation IC cards, admission cards, etc. It reacts to the sensor while stored, so there is no need to remove the card at the ticket gate or charge machine. A reel (up to 60 cm) is included as an accessory. It is filled with sponge, so it can be compressed tightly and stored in a purse or bag. It also has a hard core material built in to prevent the card from breaking. It opens and closes with Velcro for easy removal. Materials: Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Velcro tape, reel with carabiner Size: Main body: Total length 16 cm, width 6.5 cm, thickness 2.5 cm Joint including D-ring: 4 cm Reel with carabiner: Height 5 cm x width 4 cm, reel length: maximum 60 cm Total weight: 60 grams Note: 1: The card is compatible with the main transportation IC card size [height 8.5 cm, width 5.7 cm], but please check the size of your card just to be sure. It can be compatible if the size of the inner bag is within the range of [height 9 cm, width 6 cm]. Note: 2: The stored card cannot be viewed from the outside. If you need to visually check the information on the card, you will need to remove the card. Note: 3: Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
-
pass case, card case, commuter pass case, card holder, KARAKURIGOKORO, shipping from Japan, unisex, handmade, shark
¥1,900
《Product Description》 A pass case/card case in the shape of a whale shark. It can store transportation IC cards, admission cards, etc. It reacts to the sensor while stored, so there is no need to remove the card at the ticket gate or charge machine. A reel (up to 60 cm) is included as an accessory. It is filled with sponge, so it can be compressed tightly and stored in a purse or bag. It also has a hard core material built in to prevent the card from breaking. It opens and closes with Velcro for easy removal. Materials: Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Velcro tape, reel with carabiner Size: Main body: Total length 16 cm, width 6.5 cm, thickness 2.5 cm Joint including D-ring: 4 cm Reel with carabiner: Height 5 cm x width 4 cm, reel length: maximum 60 cm Total weight: 60 grams Note: 1: The card is compatible with the main transportation IC card size [height 8.5 cm, width 5.7 cm], but please check the size of your card just to be sure. It can be compatible if the size of the inner bag is within the range of [height 9 cm, width 6 cm]. Note: 2: The stored card cannot be viewed from the outside. If you need to visually check the information on the card, you will need to remove the card. Note: 3: Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
-
pass case, card case, commuter pass case, card holder, KARAKURIGOKORO, shipping from Japan, unisex, handmade, shark
¥1,900
《Product Description》 A pass case/card case in the shape of a whale shark. It can store transportation IC cards, admission cards, etc. It reacts to the sensor while stored, so there is no need to remove the card at the ticket gate or charge machine. A reel (up to 60 cm) is included as an accessory. It is filled with sponge, so it can be compressed tightly and stored in a purse or bag. It also has a hard core material built in to prevent the card from breaking. It opens and closes with Velcro for easy removal. Materials: Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Velcro tape, reel with carabiner Size: Main body: Total length 16 cm, width 6.5 cm, thickness 2.5 cm Joint including D-ring: 4 cm Reel with carabiner: Height 5 cm x width 4 cm, reel length: maximum 60 cm Total weight: 60 grams Note: 1: The card is compatible with the main transportation IC card size [height 8.5 cm, width 5.7 cm], but please check the size of your card just to be sure. It can be compatible if the size of the inner bag is within the range of [height 9 cm, width 6 cm]. Note: 2: The stored card cannot be viewed from the outside. If you need to visually check the information on the card, you will need to remove the card. Note: 3: Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
-
pass case, card case, commuter pass case, card holder, KARAKURIGOKORO, shipping from Japan, unisex, handmade, shark
¥1,900
《Product Description》 A pass case/card case in the shape of a whale shark. It can store transportation IC cards, admission cards, etc. It reacts to the sensor while stored, so there is no need to remove the card at the ticket gate or charge machine. A reel (up to 60 cm) is included as an accessory. It is filled with sponge, so it can be compressed tightly and stored in a purse or bag. It also has a hard core material built in to prevent the card from breaking. It opens and closes with Velcro for easy removal. Materials: Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Velcro tape, reel with carabiner Size: Main body: Total length 16 cm, width 6.5 cm, thickness 2.5 cm Joint including D-ring: 4 cm Reel with carabiner: Height 5 cm x width 4 cm, reel length: maximum 60 cm Total weight: 60 grams Note: 1: The card is compatible with the main transportation IC card size [height 8.5 cm, width 5.7 cm], but please check the size of your card just to be sure. It can be compatible if the size of the inner bag is within the range of [height 9 cm, width 6 cm]. Note: 2: The stored card cannot be viewed from the outside. If you need to visually check the information on the card, you will need to remove the card. Note: 3: Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
-
pass case, card case, commuter pass case, card holder, KARAKURIGOKORO, shipping from Japan, unisex, handmade, shark
¥1,900
《Product Description》 A pass case/card case in the shape of a whale shark. It can store transportation IC cards, admission cards, etc. It reacts to the sensor while stored, so there is no need to remove the card at the ticket gate or charge machine. A reel (up to 60 cm) is included as an accessory. It is filled with sponge, so it can be compressed tightly and stored in a purse or bag. It also has a hard core material built in to prevent the card from breaking. It opens and closes with Velcro for easy removal. Materials: Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Velcro tape, reel with carabiner Size: Main body: Total length 16 cm, width 6.5 cm, thickness 2.5 cm Joint including D-ring: 4 cm Reel with carabiner: Height 5 cm x width 4 cm, reel length: maximum 60 cm Total weight: 60 grams Note: 1: The card is compatible with the main transportation IC card size [height 8.5 cm, width 5.7 cm], but please check the size of your card just to be sure. It can be compatible if the size of the inner bag is within the range of [height 9 cm, width 6 cm]. Note: 2: The stored card cannot be viewed from the outside. If you need to visually check the information on the card, you will need to remove the card. Note: 3: Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
-
pass case, card case, commuter pass case, card holder, KARAKURIGOKORO, shipping from Japan, unisex, handmade, shark
¥1,900
《Product Description》 A pass case/card case in the shape of a whale shark. It can store transportation IC cards, admission cards, etc. It reacts to the sensor while stored, so there is no need to remove the card at the ticket gate or charge machine. A reel (up to 60 cm) is included as an accessory. It is filled with sponge, so it can be compressed tightly and stored in a purse or bag. It also has a hard core material built in to prevent the card from breaking. It opens and closes with Velcro for easy removal. Materials: Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Velcro tape, reel with carabiner Size: Main body: Total length 16 cm, width 6.5 cm, thickness 2.5 cm Joint including D-ring: 4 cm Reel with carabiner: Height 5 cm x width 4 cm, reel length: maximum 60 cm Total weight: 60 grams Note: 1: The card is compatible with the main transportation IC card size [height 8.5 cm, width 5.7 cm], but please check the size of your card just to be sure. It can be compatible if the size of the inner bag is within the range of [height 9 cm, width 6 cm]. Note: 2: The stored card cannot be viewed from the outside. If you need to visually check the information on the card, you will need to remove the card. Note: 3: Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
-
pass case, card case, commuter pass case, card holder, KARAKURIGOKORO, shipping from Japan, unisex, handmade, shark
¥1,900
《Product Description》 A pass case/card case in the shape of a whale shark. It can store transportation IC cards, admission cards, etc. It reacts to the sensor while stored, so there is no need to remove the card at the ticket gate or charge machine. A reel (up to 60 cm) is included as an accessory. It is filled with sponge, so it can be compressed tightly and stored in a purse or bag. It also has a hard core material built in to prevent the card from breaking. It opens and closes with Velcro for easy removal. Materials: Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Velcro tape, reel with carabiner Size: Main body: Total length 16 cm, width 6.5 cm, thickness 2.5 cm Joint including D-ring: 4 cm Reel with carabiner: Height 5 cm x width 4 cm, reel length: maximum 60 cm Total weight: 60 grams Note: 1: The card is compatible with the main transportation IC card size [height 8.5 cm, width 5.7 cm], but please check the size of your card just to be sure. It can be compatible if the size of the inner bag is within the range of [height 9 cm, width 6 cm]. Note: 2: The stored card cannot be viewed from the outside. If you need to visually check the information on the card, you will need to remove the card. Note: 3: Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
-
pass case, card case, commuter pass case, card holder, KARAKURIGOKORO, shipping from Japan, unisex, handmade, shark
¥1,900
《Product Description》 A pass case/card case in the shape of a whale shark. It can store transportation IC cards, admission cards, etc. It reacts to the sensor while stored, so there is no need to remove the card at the ticket gate or charge machine. A reel (up to 60 cm) is included as an accessory. It is filled with sponge, so it can be compressed tightly and stored in a purse or bag. It also has a hard core material built in to prevent the card from breaking. It opens and closes with Velcro for easy removal. Materials: Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Velcro tape, reel with carabiner Size: Main body: Total length 16 cm, width 6.5 cm, thickness 2.5 cm Joint including D-ring: 4 cm Reel with carabiner: Height 5 cm x width 4 cm, reel length: maximum 60 cm Total weight: 60 grams Note: 1: The card is compatible with the main transportation IC card size [height 8.5 cm, width 5.7 cm], but please check the size of your card just to be sure. It can be compatible if the size of the inner bag is within the range of [height 9 cm, width 6 cm]. Note: 2: The stored card cannot be viewed from the outside. If you need to visually check the information on the card, you will need to remove the card. Note: 3: Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
-
pass case, card case, commuter pass case, card holder, KARAKURIGOKORO, shipping from Japan, unisex, handmade, shark
¥1,900
《Product Description》 A pass case/card case in the shape of a whale shark. It can store transportation IC cards, admission cards, etc. It reacts to the sensor while stored, so there is no need to remove the card at the ticket gate or charge machine. A reel (up to 60 cm) is included as an accessory. It is filled with sponge, so it can be compressed tightly and stored in a purse or bag. It also has a hard core material built in to prevent the card from breaking. It opens and closes with Velcro for easy removal. Materials: Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Velcro tape, reel with carabiner Size: Main body: Total length 16 cm, width 6.5 cm, thickness 2.5 cm Joint including D-ring: 4 cm Reel with carabiner: Height 5 cm x width 4 cm, reel length: maximum 60 cm Total weight: 60 grams Note: 1: The card is compatible with the main transportation IC card size [height 8.5 cm, width 5.7 cm], but please check the size of your card just to be sure. It can be compatible if the size of the inner bag is within the range of [height 9 cm, width 6 cm]. Note: 2: The stored card cannot be viewed from the outside. If you need to visually check the information on the card, you will need to remove the card. Note: 3: Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
-
pass case, card case, commuter pass case, card holder, KARAKURIGOKORO, shipping from Japan, unisex, handmade, shark
¥1,900
《Product Description》 A pass case/card case in the shape of a whale shark. It can store transportation IC cards, admission cards, etc. It reacts to the sensor while stored, so there is no need to remove the card at the ticket gate or charge machine. A reel (up to 60 cm) is included as an accessory. It is filled with sponge, so it can be compressed tightly and stored in a purse or bag. It also has a hard core material built in to prevent the card from breaking. It opens and closes with Velcro for easy removal. Materials: Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Velcro tape, reel with carabiner Size: Main body: Total length 16 cm, width 6.5 cm, thickness 2.5 cm Joint including D-ring: 4 cm Reel with carabiner: Height 5 cm x width 4 cm, reel length: maximum 60 cm Total weight: 60 grams Note: 1: The card is compatible with the main transportation IC card size [height 8.5 cm, width 5.7 cm], but please check the size of your card just to be sure. It can be compatible if the size of the inner bag is within the range of [height 9 cm, width 6 cm]. Note: 2: The stored card cannot be viewed from the outside. If you need to visually check the information on the card, you will need to remove the card. Note: 3: Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
-
Handy fan marker, Portable fan marker, Umbrella marker, Handy fan
¥350
There are many similar handheld fans, and it can be hard to tell whose fan belongs to whom at school or work. With this fan marker, it's obvious at a glance! You'll know it's yours right away. You'll also get curious looks from people around you, asking, "What on earth is this?" How about making it a fun little summer item? *It is attached with Velcro, so you attach one end of the Velcro to your handheld fan. [Materials] - Resin, sticker, marabou blades, Velcro ◎Size: Body dimensions: 9.8" H x 4.5" W x 1.2" D Weight: Approx. 7.1 oz ◎Note: 1: When using, please turn on the fan switch and enjoy. ◎Note: 2: Be careful not to get it wet.
-
karakuri burger, pass burger, pass case, card case, commuter pass case, card holder
¥1,900
◎About the design: Two different designs are available for sale: "normal" and "with drool." This website introduces the "normal" version. Please see the "with drool" version on another website. ーーーーーーーーーーーーーーーーーーーーーーーーーーーー ◎Product description: A pass case/card case in the shape of a hamburger. It can store transportation IC cards, admission cards, etc. The card will react to the sensor while stored, so there is no need to remove it at the ticket gate or charge machine. A reel (up to 23.6 in) is included as an accessory. It is filled with sponge, so you can shrink it up and store it in your bag. It also has a hard core to prevent the cards from breaking. It opens and closes with Velcro for easy removal. ◎Materials: Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Velcro tape, reel with carabiner ◎Size: Main body: Diameter 3.9 in, thickness 1.6 in, Joint including D-ring 1.6 in, Reel with carabiner: Height 1.9 in x width 1.5 in, reel length/maximum 23.6 in Total weight: 2.1 oz ◎Note: 1: The card is compatible with the main transportation IC card size [height 3.3 in, width 2.1 in], but please check the size of your card just to be sure. It can be compatible if the size of the inner bag is within the range of [height 3.5 in, width 2.4 in]. ◎Note: 2: The stored card cannot be viewed from the outside. If you need to visually check the information on the card, you will need to remove the card. ◎Note: 3: Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
-
karakuri burger, pass burger, pass case, card case, commuter pass case, card holder
¥1,900
◎About the design: Two different designs are available for sale: "normal" and "with drool." This website introduces the "with drool" version. Please see the "nomal" version on another website. ーーーーーーーーーーーーーーーーーーーーーーーーーーーー ◎Product description: A pass case/card case in the shape of a hamburger. It can store transportation IC cards, admission cards, etc. The card will react to the sensor while stored, so there is no need to remove it at the ticket gate or charge machine. A reel (up to 23.6 in) is included as an accessory. It is filled with sponge, so you can shrink it up and store it in your bag. It also has a hard core to prevent the cards from breaking. It opens and closes with Velcro for easy removal. ◎Materials: Sponge (soft polyurethane foam), water-repellent polyester canvas fabric, 100% cotton oxford fabric, plastic D-ring, core material (polyethylene foam), Velcro tape, reel with carabiner ◎Size: Main body: Diameter 3.9 in, thickness 1.6 in, Joint including D-ring 1.6 in, Reel with carabiner: Height 1.9 in x width 1.5 in, reel length/maximum 23.6 in Total weight: 2.1 oz ◎Note: 1: The card is compatible with the main transportation IC card size [height 3.3 in, width 2.1 in], but please check the size of your card just to be sure. It can be compatible if the size of the inner bag is within the range of [height 3.5 in, width 2.4 in]. ◎Note: 2: The stored card cannot be viewed from the outside. If you need to visually check the information on the card, you will need to remove the card. ◎Note: 3: Depending on the charging machine, you may need to remove the card. (For example, when there is no space for the sensor.)
-
smartphone bag with a shoulder strap whale shark shoulder bag
¥3,200
A smartphone shoulder bag in the shape of a whale shark. [Point 1] Can be used as both a shoulder bag and a waist pouch! Attached shoulder strap (approximately 59 inches) and waist strap (about 9.8 inches) [Point 2] Easy to put in and take out! There are no fasteners such as buttons or fasteners at the entrance. You can smoothly put in and take out your smartphone / iPhone. ■Compatible models■ Please check the size of the model you have before purchasing. The internal dimensions of this product are height 6.3 inches x width 3.3 inches x depth 0.39inches. Models with a vertical length of 6.3 inches or more have the top outside. ■ Material ■ ・Cotton fabric ・Sponge (soft polyurethane foam) ・halter snapt ・D ring ■ Dimensions ■ ・9 inches in height, 5.9 inches in width, 1.96 inches in thickness ・ Weight about 50 grams ■About washing■ Hand washing is preferred.
-
smartphone bag with a shoulder strap whale shark shoulder bag
¥3,200
A smartphone shoulder bag in the shape of a whale shark. [Point 1] Can be used as both a shoulder bag and a waist pouch! Attached shoulder strap (approximately 59 inches) and waist strap (about 9.8 inches) [Point 2] Easy to put in and take out! There are no fasteners such as buttons or fasteners at the entrance. You can smoothly put in and take out your smartphone / iPhone. ■Compatible models■ Please check the size of the model you have before purchasing. The internal dimensions of this product are height 6.3 inches x width 3.3 inches x depth 0.39inches. Models with a vertical length of 6.3 inches or more have the top outside. ■ Material ■ ・Cotton fabric ・Sponge (soft polyurethane foam) ・halter snapt ・D ring ■ Dimensions ■ ・9 inches in height, 5.9 inches in width, 1.96 inches in thickness ・ Weight about 50 grams ■About washing■ Hand washing is preferred.
-
smartphone bag with a shoulder strap whale shark shoulder bag
¥3,200
A smartphone shoulder bag in the shape of a whale shark. [Point 1] Can be used as both a shoulder bag and a waist pouch! Attached shoulder strap (approximately 59 inches) and waist strap (about 9.8 inches) [Point 2] Easy to put in and take out! There are no fasteners such as buttons or fasteners at the entrance. You can smoothly put in and take out your smartphone / iPhone. ■Compatible models■ Please check the size of the model you have before purchasing. The internal dimensions of this product are height 6.3 inches x width 3.3 inches x depth 0.39inches. Models with a vertical length of 6.3 inches or more have the top outside. ■ Material ■ ・Cotton fabric ・Sponge (soft polyurethane foam) ・halter snapt ・D ring ■ Dimensions ■ ・9 inches in height, 5.9 inches in width, 1.96 inches in thickness ・ Weight about 50 grams ■About washing■ Hand washing is preferred.
-
smartphone bag with a shoulder strap whale shark shoulder bag
¥3,200
A smartphone shoulder bag in the shape of a whale shark. [Point 1] Can be used as both a shoulder bag and a waist pouch! Attached shoulder strap (approximately 59 inches) and waist strap (about 9.8 inches) [Point 2] Easy to put in and take out! There are no fasteners such as buttons or fasteners at the entrance. You can smoothly put in and take out your smartphone / iPhone. ■Compatible models■ Please check the size of the model you have before purchasing. The internal dimensions of this product are height 6.3 inches x width 3.3 inches x depth 0.39inches. Models with a vertical length of 6.3 inches or more have the top outside. ■ Material ■ ・Cotton fabric ・Sponge (soft polyurethane foam) ・halter snapt ・D ring ■ Dimensions ■ ・9 inches in height, 5.9 inches in width, 1.96 inches in thickness ・ Weight about 50 grams ■About washing■ Hand washing is preferred.